Battery - HP 11 G4 Maintenance And Service Manual

6. Remove the TouchPad board (5) and cable.
Reverse this procedure to install the TouchPad board.

Battery

Description
Battery (3-cell, 36-WHr, 3.25-AHr, Li-ion; includes cable)
Before removing the battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the keyboard/top cover (see
Remove the battery:
1. Remove the six Phillips PM1.9×4.2 screws (2) that secure the battery to the base enclosure.
32 Chapter 5 Removal and replacement procedures
Keyboard/top cover on page
Spare part number
767068-001
24).