Using Windows 7 Operating System Media - HP ProBook 640 G1 Maintenance And Service Manual

Hide thumbs Also See for ProBook 640 G1:
Table of Contents

Advertisement

1.
If possible, back up all personal files.
2.
If possible, check for the presence of the HP Recovery partition: click Start, right-click Computer, click
Manage, and then click Disk Management.
NOTE:
and programs using the Windows 7 operating system media and the Driver Recovery media. For
additional information, see
3.
If the HP Recovery partition is listed, restart the computer, and then press
key for Startup Menu" message is displayed at the bottom of the screen.
4.
Press
f11
5.
Follow the on-screen instructions.

Using Windows 7 operating system media

If you cannot use the recovery media you previously created using the HP Recovery Disc Creator (select
models only), you must purchase a Windows 7 operating system DVD to reboot the computer and repair the
operating system.
To order a Windows 7 operating system DVD, go to the HP website. For U.S. support, go to
http://www.hp.com/support. For worldwide support, go to
wwcontact_us.html. You can also order the DVD by calling support. For contact information, see the
Worldwide Telephone Numbers booklet included with the computer.
CAUTION:
Using a Windows 7 operating system DVD completely erases hard drive contents and reformats
the hard drive. All files that you have created and any software that you have installed on the computer are
permanently removed. When reformatting is complete, the recovery process helps you restore the operating
system, as well as drivers, software, and utilities.
To initiate recovery using a Windows 7 operating system DVD:
NOTE:
This process takes several minutes.
1.
If possible, back up all personal files.
2.
Restart the computer, and then insert the Windows 7 operating system DVD into the optical drive before
the Windows operating system loads.
3.
When prompted, press any keyboard key.
4.
Follow the on-screen instructions.
5.
Click Next.
6.
Select Repair your computer.
7.
Follow the on-screen instructions.
After the repair is completed:
1.
Eject the Windows 7 operating system DVD and then insert the Driver Recovery DVD.
2.
Install the Hardware Enabling Drivers first, and then install Recommended Applications.
If the HP Recovery partition is not listed, you must recover your operating system
Using Windows 7 operating system media on page
while the "Press <F11> for recovery" message is displayed on the screen.
esc
http://welcome.hp.com/country/us/en/
145.
while the "Press the ESC
Windows 7 145

Advertisement

Table of Contents
loading

This manual is also suitable for:

Probook 655 g1Probook 645 g1Probook 650 g1

Table of Contents