Use Wps To Add A Computer To The Extender's Wifi Network - NETGEAR EX6200 User Manual

5. Select Settings > Wireless.
6. In each WiFi Speed menu, select a speed.
7. Click the SAVE button.
Your settings are saved.
Use WPS to Add a Computer to the Extender's WiFi
Network
WPS (WiFi Protected Setup) lets you connect a computer or WiFi device to the extender's
network without entering the WiFi network passphrase or key. Instead, you use a WPS button
or enter a PIN to connect.
If you use the push button method, the WiFi device that you are trying to connect must
include a physical push button or a software button. If you use the PIN method, you must
know the PIN of the WiFi device that you are trying to connect.
WPS supports WPA and WPA2 WiFi security. If your extender network is open (no WiFi
security is set), connecting with WPS automatically sets WPA + WPA2 WiFi security on the
extender network and generates a random passphrase. You can view this passphrase on the
WiFi Settings page (for more information, see
For information about using WPS to connect the extender to a WiFi network during setup,
see Use the Extender in Access Point Mode
AC1200 WiFi Range Extender
View WiFi Settings
on page 21.
Extender Network Settings
34
on page 29).