Attach The Stand - NETGEAR EX6200 User Manual

The antennas are preinstalled. In the unlikely situation that an antenna is loose, you must
tighten it. (A loose antenna could affect the performance of the extender.)

To tighten an antenna:
1. Straighten the antenna.
2. Turn the antenna clockwise until tightened.
After you have tightened the antenna, you can change its position.

Attach the Stand

If you prefer to place the extender in upright (vertical) position, attach the stand that comes
with the extender.
Although the extender functions well in either horizontal or vertical position, a horizontal
position might give a better performance.
Figure 4. Attaching the stand
AC1200 WiFi Range Extender
Overview
10