Immergas CRD Instruction Booklet page 21

6.3.2 Operation time band change
If the standard program does not meet
your needs in terms of operation time
bands, it can be modified.
Press the button
ming phase.
The day or group of days to be changed
will appear on the display (detail A fig.
10), press buttons
from one day to the next in the following
sequence: Monday, Tuesday, Wednesday
...Sunday; Mo - Tu; Sa - Su; Mo - Sa; Su;
Mo - Su.
After selecting the day/s to be changed
press the button
show the time flashing and the message
ON 1 relevant to the first Comfort tem-
20
to enter the program-
and to go
and the display will
perature band (detail B fig. 10). Press the
buttons and
switch-on time: the time increases/de-
creases 30 minutes each time the button
is pressed and also the corresponding clock
on the display is updated.
Press the button
and the display will show the switch-off
time and the message OF 1 relevant to
the first Comfort temperature operation
band (detail C fig. 10). Press the buttons
and
off time: the time increases/decreases 30
minutes each time the button is pressed
and also the corresponding clock on the
display is updated.
to change the
to confirm the change
to change the switch-