Touchpad Button Board - HP 15 TouchSmart Maintenance And Service Manual

TouchPad button board

Description
TouchPad button board (includes bracket)
Before removing the TouchPad button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the keyboard (see
6. Remove the top cover (see
To remove the TouchPad button board:
1. Position the top cover upside down with the front toward you.
2. Disconnect the touchpad board cable from the touchpad (1).
3. Remove the two Phillips PM2.0×3.5 screws (2) that secure the TouchPad button board to the top cover.
Battery on page 31).
Keyboard on page 35).
Top cover on page 43).
Spare part number
749651-001
Component replacement procedures 47