Table of Contents
Advertisement
Speakers
Description
Speaker Kit (includes left and right speakers and cables)
Before removing the speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
5.
Disconnect the battery cable from the system board (see
Remove the speakers:
1.
Disconnect the speaker cable (1) from the system board.
2.
Release the speaker cables from the routing clips (2) built into the base enclosure.
3.
Remove the two Philllips PM2.0×3.3 screws (3) that secure the speakers to the base enclosure.
Keyboard/top cover on page
Battery on page
Spare part number
809792-001
20).
26).
Component replacement procedures
41
Advertisement
Table of Contents
