Table of Contents
Advertisement
Power button board
Description
Power button board (includes cable)
Before removing the power button board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Remove the power button board:
1.
Turn the keyboard/top cover upside down with the front toward you.
2.
Remove the two Phillips PM2.0×3.3 screws (1) that secure the power button board to the keyboard/
top cover.
3.
Remove the power button board (2).
Reverse this procedure to install the power button board.
Keyboard/top cover on page
Spare part number
809787-001
20).
Component replacement procedures
25
Advertisement
Table of Contents
