Table of Contents
Advertisement
Reverse this procedure to install the keyboard/top cover.
TouchPad board
Description
TouchPad board (includes cable and double-sided adhesive)
Before removing the TouchPad board, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Remove the TouchPad button board:
1.
Turn the keyboard/top cover upside down with the front toward you.
2.
Release the grounding tape strips (1) that conceal the screws that secure the TouchPad board to
the keyboard/top cover.
3.
Detach the TouchPad board cable (2) from the keyboard/top cover. (The TouchPad board cable is
attached to the keyboard/top cover with double-sided adhesive.)
4.
Remove the two Phillips PM2.0×2.0 broad head screws (3) that secure the TouchPad board to
the keyboard/top cover.
5.
Release the TouchPad board (4) by pressing it through the opening in the keyboard/top cover.
6.
Remove the TouchPad board and cable.
Keyboard/top cover on page
Spare part number
809789-001
20).
Component replacement procedures
23
Advertisement
Table of Contents
