CUB CRAFTERS
CC18-180
4.3.3.4 Cruise
Power ................................................................ Adjust
Mixture ............................................................... Adjust
Carburetor Heat ......................................... As required
4.3.3.5 Descent
Power ................................................................ Adjust
Mixture ......................................... Full rich below 3000'
Carburetor Heat ......................................... As required
4.3.3.6 Approach and Landing
4.3.3.6.1 Normal Landing
Fuel Selector ........................................................ Both
Seat Belts ..................................................... Fastened
Mixture .................................................................... Set
Flaps ....................................................................... Set
INDICATED AIRSPEED (IAS)
Maximum Speed 1st Notch Flaps (22°)
Maximum Speed Full Flaps (50°)
Trim ........................................................... As required
Speed ........................................................ As required
(1.3 times full flaps stall speed at gross weight is
63 mph or 55 knots IAS)
Issued: 05/31/05
Date of Revision: 11/20/12
NORMAL PROCEDURES
MPH
98
89
REPORT TC10000AFM
Page Number: 4-13
SECTION 4
KNOTS
85
77