CUB CRAFTERS
CC18-180
4.3.3 FLIGHT
4.3.3.1 Before Takeoff
Parking Brake ......................................................... Set
Throttle ...................................................... 1700 RPM*
Magnetos ........................................................... Check
Drop not to exceed 175 RPM or 50 RPM differential
between magnetos and no engine roughness.
Carburetor Heat ........ Hot, note RPM drop and remove
Engine Instruments ............................................ Check
Ammeter ............................................................ Check
Throttle ....................................................... Check idle
Throttle ....................................................... 1000 RPM
Flight Instruments .............................................. Check
Fuel Selector ............... Both and sufficient qty for flight
Engine Instruments ............................................ Check
Mixture .................................................................. Set*
Magnetos .............................................................. Both
Carburetor Heat ...................................................... Off
Primer ............................................ .Closed and locked
Trim ........................................................................ Set
Flaps ....................................... First notch (takeoff 22°)
Controls ............................ Free and proper movement
Doors ................................................................ Closed
Strobes ...................................................... As required
Transponder and Other Avionics ............................ On
Seat Belts ........................................... Check fastened
Parking Brakes ............................................... Release
* When operating at high altitudes and/or temperatures, it
may be necessary to lean the mixture for peak RPM.
Issued: 05/31/05
Date of Revision: 11/20/12
NORMAL PROCEDURES
REPORT TC10000AFM
Page Number: 4-11
SECTION 4