Cub Crafters CC18-180 Pilot Operating Handbook page 436

SECTION 9.14 CUB CRAFTERS
SUPPLEMENTS-GTN 635 CC18-180
9.14.5 NORMAL PROCEDURES
Refer to the Cockpit Reference Guide defined in Section
9.14.3.1 of this document or the Pilot's Guide defined in
Section 9.14.8.1 for normal operating procedures and a
complete list of system messages and associated flight
crew actions. This includes all GPS operations, VHF
communication and navigation, traffic, data linked weather,
and Multi-Function Display information.
The GTN requires a reasonable degree of familiarity to
avoid becoming too engrossed at the expense of basic
see-and-avoid in VMC. Garmin provides training tools with
the Pilot's Guide and PC based simulator. Pilots should
take full advantage of these training tools to enhance
system familiarization.
CAUTION
The following information explains the GTN functionality
and procedures for instrument approaches. The CC18 is
not approved for IFR operations and any such
approaches must be carried out in VMC under VFR.
9.14.5.1 UNIT POWER ON
Database ............................ REVIEW EFFECTIVE DATES
Self Test .......... VERIFY OUTPUTS TO NAV INDICATORS
9.14.5.2 BEFORE TAKEOFF
System Messages and Annunciators ........... CONSIDERED
REPORT TC10000AFM
Issued: 02/05/13
Page number 9-14-20 Date of revision: N/A