Cub Crafters CC18-180 Pilot Operating Handbook page 426

SECTION 9.14
SUPPLEMENTS-GTN 635
The Main and GPS software versions are displayed on the
start-up page immediately after power-on. All software
versions displayed in Table 1 can be viewed on the
System – System Status page.
Software Item
Main SW Version
GPS SW Version
Com SW Version
Nav SW Version
9.14.3.6 SD CARD
It is required that the SD card be present in the unit at all
times.
9.14.3.7 NAVIGATION DATABASE
GPS/SBAS based IFR enroute, oceanic, and terminal
navigation is prohibited.
Discrepancies that invalidate a procedure should be
reported to Garmin International. The affected procedure is
prohibited from being flown using data from the navigation
database until a new navigation database is installed in the
aircraft and verified that the discrepancy has been
corrected. Navigation database discrepancies can be
reported at FlyGarmin.com by selecting "Aviation Data
Error Report." Flight crew and operators can view
navigation database alerts at FlyGarmin.com then select
"NavData Alerts."
REPORT TC10000AFM
Page number 9-14-10
(or later FAA Approved versions)
Table 1 - Software Versions
CUB CRAFTERS
Software Version
3.00
5.0
2.10
6.02
Date of revision: N/A
CC18-180
Issued: 02/05/13