Cub Crafters CC18-180 Pilot Operating Handbook page 295

CUB CRAFTERS
CC18-180

One of the approved sensors, for a single or dual
GNS 430 installation, for North Atlantic Minimum
Navigation Performance Specification (MNPS)
Airspace in accordance with AC 91-49 and
AC 120-33.

The system meets RNP5 airspace (BRNAV)
requirements of AC 90-96 and in accordance with
AC 20-138 and JAA GAI-20 ACJ 20X4, provided it
is receiving usable navigation information from the
GPS receiver.

The equipment as installed has been found to
comply with the requirements for GPS primary
means of navigation in oceanic and remote
airspace, when used in conjunction with the 400
Series Trainer Program incorporating the FDE
Prediction Program. This does not constitute an
operational approval.
Navigation is accomplished using the WGS-84 (NAD-83)
coordinate reference datum. Navigation data is based
upon use of only the Global Positioning System (GPS)
operated by the United States of America.
Issued: 5/31/05
Date of revision: 12/06/05
SECTION 9.10
SUPPLEMENTS-GNS 430
REPORT TC10000AFM
Page number 9-10-3