Cub Crafters CC18-180 Pilot Operating Handbook page 261

CUB CRAFTERS
CC18-180
9.6.7.3 Code Selection
Code selection is done with eight keys (0-7) that provide
4,096 active identification codes. Pushing one of these
keys begins the code selection sequence. The new code
will not be activated until the fourth digit is entered.
Pressing the CLR key will move the cursor back to the
previous digit.
Pressing the CLR key when the cursor is on the first digit
of the code, or pressing the CRSR key during code entry
will remove the cursor and cancel the data entry,
restoring the previous code. The numbers 8 and 9 are not
used for code entry, only for entering Count Down time,
and in the Configuration Mode.
Important Codes:
1200 The VFR code for any altitude in the USA
(Refer to ICAO standards elsewhere)
7000 The VFR code commonly used in Europe
(Refer to ICAO standards)
7500 Hijack code (Aircraft subject to unlawful
interference)
7600 Loss of communications
7700 Emergency
7777 Military interceptor operations (Never squawk
this code)
0000 Military use (Not enterable)
Issued: 05/31/05
Date of Revision: 12/06/05
SECTION 9.6
SUPPLEMENTS-GTX 330
REPORT TC10000AFM
Page Number: 9-6-7