Cub Crafters CC18-180 Pilot Operating Handbook page 251

CUB CRAFTERS
CC18-180
9.5.4.2 PILOT'S DISPLAY
The GNS 530 System data will appear on the Pilot's
CDI/HSI. The source of data is either GPS or VLOC as
annunciated on the display above the CDI key.
It is the pilot's responsibility to assure that published or
assigned procedures are correctly complied with. Course
guidance is not provided for all possible ARINC 424 leg
types. See the GNS 530 Pilot's Guide for detailed
operating procedures regarding navigation capabilities for
specific ARINC 424 leg types.
9.5.4.3 AUTOMATIC
CAPTURE
This feature provides a method for system navigation
data present on the external indicators to be switched
from GPS guidance to localizer / glide slope guidance.
The data is found via the Jeppeson data card and tuned
manually. It is the pilot's responsibility to ensure correct
system navigation data is present on the external
indicator before continuing a localizer based approach
beyond the final approach fix. Refer to the GNS 530
Pilot's Guide for detailed operating instructions.
Issued: 5/31/05
Date of revision: 12/06/05
SUPPLEMENTS-GNS 530
NOTE
LOCALIZER
REPORT TC10000AFM
SECTION 9.5
COURSE
Page number 9-5-9