Cub Crafters CC18-180 Pilot Operating Handbook page 25

CUB CRAFTERS SECTION 1
CC18-180 GENERAL INFORMATION
1 GENERAL INFORATION
1.1 INTRODUCTION
This Pilot's Operating Manual contains information required
by the FAA at the time the CC18-180 was certified. It also
has additional data which Cub Crafters, based on its
experience, has found useful.
This manual is the Approved Pilot's Operating Handbook
and it is part of the equipment that must be onboard the
aircraft whenever it is operated.
This manual is not intended to be a flight instruction manual.
It is not a substitute for adequate, competent flight training,
knowledge of current Airworthiness Directives affecting the
airplane, or applicable aviation regulations.
The pilot-in-command is responsible for determining
whether the airplane is safe for flight. He/she is also
responsible for ensuring that all operations are conducted
within the limitations defined by this manual, instrument
markings, and appropriate placards.
While it is intended that this manual be used in flight, it must
be studied regularly. The pilot must be familiar with all
limitations, performance, procedures, and operational
handling characteristics of the airplane prior to flight.
The information in this manual is divided into numbered
sections, each of which is provided with a tab divider. The
order of the sections has been designed so that the
LIMITATIONS and EMERGENCY SECTIONS may be
looked up quickly. The EMERGENCY SECTIONS has a
red divider tab.
Issued: 5/31/05 REPORT TC10000AFM
Date of Revision: N/A Page Number: 1-1