Cub Crafters CC18-180 Pilot Operating Handbook page 234

SECTION 9.4
SUPPLEMENTS-EDM-800
9.4.7.11 Typical Normal Parameters
The following chart lists typical normal parameter values
that you will observe on a carbureted engine.
Parameter
EGTs in Cruise
EGT span (DIF)
CHTs
CHT span
Shock cooling*
Table 9-4-2 Typical Normal Parameters
*Maintain a cooling rate of less than -60°/minute. You will
find that the cylinder with the greatest shock cooling will
shift from front cylinders (during climb out) to the rear
cylinders (during descent).
For more details on diagnosing the health of the engine,
please refer to the EDM-800 Pilot's Guide, published by
J.P. Instruments Inc.
9.4.8 Fuel Flow
9.4.8.1 Start Up Fuel
After initial self-test, you will be asked to inform the EDM
of start up fuel.
second, and then flash FILL? N until any button is
pressed. During flight you may also inform the EDM of
startup fuel using the pilot program mode display if you
forgot to do so at start up.
REPORT TC10000AFM
Page number 9-4-22
Normal range
1350°F
120 to 150°F
350°F (OAT 60°F)
50 to 70°F
-40°/minute
The EDM will display FUEL for one
CUB CRAFTERS
CC18-180
Comments
EGT should drop 200°F
when throttle is applied
Issued: 5/31/05
Date of revision: 12/06/05