Cub Crafters CC18-180 Pilot Operating Handbook page 224

SECTION 9.4
SUPPLEMENTS-EDM-800
9.4.7.3.1 Automatic Mode
Tap the LF button and then tap the STEP button. In the
Automatic mode the EDM displays the parameter
sequence at a user-selected rate
Some individual parameters can be excluded from the
Automatic mode: tap STEP to enter the Manual mode.
Tap STEP to index to the parameter you want to exclude.
Then tap both the STEP and LF buttons simultaneously.
Excluded parameters display a decimal point before the
parameter name.
Tapping the STEP and LF buttons simultaneously will
toggle back and forth between include and exclude.
● Every time you turn on the EDM, all parameters are
reset to be included.
● All installed parameters are always displayed in the
Manual mode. Exclusion only applies to the Automatic
mode.
● All parameters are checked for alarm conditions every
second regardless of their included or excluded status.
● You cannot exclude EGT, CHT
REPORT TC10000AFM
Page number 9-4-12
CUB CRAFTERS
CC18-180
Issued: 5/31/05
Date of revision: 12/06/05