Cub Crafters CC18-180 Pilot Operating Handbook page 216

SECTION 9.4
SUPPLEMENTS-EDM-800
9.4.4.3 Cruise
After the engine is warmed up, use LeanFind to lean the
mixture.
Suggested setup:
Normalize view
Automatic Mode
9.4.4.4 Descent
Suggested setup:
Percentage view
Manual Mode
9.4.5 PERFORMANCE
No change.
9.4.6 WEIGHT AND BALANCE
The EDM-800 was installed at the factory and is included
in the licensed weight and balance information in section
6 of the Pilot's Operating Handbook and FAA Approved
Airplane Flight Manual.
REPORT TC10000AFM
Page number 9-4-4
Be alert for: Be alert for abnormal
patterns of EGTs and CHT. (See
Engine Diagnosis Charts on pages
9-54 thru
adjustments to RPM, then mixture
to level the display columns.
Be alert for: CLD: shock cooling
alarm is set to -60°F. Average cool
rates of -40° F/minute to -60°
F/minute are normal.
CUB CRAFTERS
CC18-180
56). Make
Issued: 5/31/05
Date of revision: 12/06/05
fine