Cub Crafters CC18-180 Pilot Operating Handbook page 215

CUB CRAFTERS
CC18-180
9.4.4.1 Engine Run Up
Suggested setup:
Run-up RPM
Normalize view
Manual Mode
checklist.
9.4.4.2 Take Off, Climb, and Full Throttle Operations
Suggested setup:
Percentage view
Automatic Mode
Issued: 5/31/05
Date of revision: 12/06/05
SUPPLEMENTS-EDM-800
Verify: uniform rise of about
50°F in all EGTs in single
magneto operation and uniform
rise of EGTs with application of
the mixture control.
Be alert for: unusually low
voltage (less
battery voltage), abnormally high
CHT, drop in EGT on one
cylinder during single magneto
–
operation
spark plug.
Include your EDM on your run-up
Verify: EGTs
consistent with past climbs.
EGTs should be in the 1100 to
1250°F range
cooling.
Be alert for: high EGT in one
cylinder, 300°F above the others
may indicate a leaking manifold
gasket.
At high density altitudes an
overly rich
significantly
power.
REPORT TC10000AFM
SECTION 9.4
than nominal
indicates fouled
and CHTs
due to
mixture
reduce engine
Page number 9-4-3
fuel
can