Cub Crafters CC18-180 Pilot Operating Handbook page 214

SECTION 9.4 CUB CRAFTERS
SUPPLEMENTS-EDM-800 CC18-180
9.4.1.1 DESCRIPTION
The JPI EDM-800 Engine Analyzer is an engine data
management system (EDM). It allows the pilot to monitor
fuel flow and for each cylinder, engine exhaust gas
temperature and cylinder head temperature. The system
has various functions that give the pilot information for
leaning mixture, diagnosing the condition of the engine as
well as providing data on fuel flow and range.
9.4.2 LIMITATIONS
Installation of the JPI EDM-800 Engine Analyzer does not
alter the basic limitations provided in Section 2 of this
Pilot's Operating Handbook and FAA Approved Airplane
Flight Manual.
9.4.3 EMERGENCY PROCEDURES
The EDM-800 should not be used as the primary means
for determining the health of the engine. However,
abnormal indications should not be disregarded and
should be cross-referenced with other powerplant
instruments. Any change in the behavior of the engine
should be treated seriously and checked by a suitably
qualified mechanic.
9.4.4 NORMAL PROCEDURES
The EDM-800 should only be used to complement the
indications given by the primary powerplant instruments.
It must not be relied on solely to determine the condition
of the engine.
REPORT TC10000AFM
Issued: 5/31/05
Page number 9-4-2 Date of revision: 12/06/05