Cub Crafters CC18-180 Pilot Operating Handbook page 195

CUB CRAFTERS
CC18-180

The system meets RNP5 airspace (BRNAV)
requirements of AC 90-96 and in accordance with
AC 20-138 and JAA GAI-20 ACJ 20X4, provided it
is receiving usable navigation information from the
GPS receiver.

The equipment as installed has been found to
comply with the requirements for GPS primary
means of navigation in oceanic and remote
airspace, when used in conjunction with the 400
Series Trainer Program incorporating the FDE
Prediction Program. This does not constitute an
operational approval.
Navigation is accomplished using the WGS-84 (NAD-83)
coordinate reference datum.
upon use of only the Global Positioning System (GPS)
operated by the United States of America.
9.2.2 LIMITATIONS
The GARMIN GNC 420 Pilot's Guide, P/N 190-00140-20,
Rev. A, dated July 1999, or later appropriate revision, must
be immediately available to the flight crew whenever
navigation is predicated on the use of the system.
addition to the Pilot's Guide, the appropriate Pilot's Guide
Addendum must also be immediately available to the flight
crew if lightning detection, Traffic Advisory System (TAS),
Traffic Information Service (TIS), Weather Datalink, or
TERRAIN are interfaced to the system or if primary means
oceanic/remote navigation is conducted.
Issued: 5/31/05
Date of revision: 12/06/05
SECTION 9.2
SUPPLEMENTS-GNC 420
Navigation data is based
REPORT TC10000AFM
Page number 9-2-3
In