Engine Mount; Propeller; Engine Cowling; Exhaust System - Cub Crafters CC18-180 Pilot Operating Handbook

SECTION 7
AIRCRAFT AND SYSTEMS
7.5.2

ENGINE MOUNT

The structure of the mount is made of 4130N steel and
the engine is attached to the mount through rubber
mounts that help reduce vibration.
7.5.3

PROPELLER

Several propellers are approved for use on the CC18-
180. They are all fixed pitch. The standard aircraft comes
with a Sensenich Propeller Manufacturing Company, Inc.
76EM8, 76 inch diameter, 56 inch pitch metal propeller.
7.5.4

ENGINE COWLING

The upper, forward and lower portions of the engine
cowling are made of fiberglass, using fire resistant resins.
The sides of the cowl are made of aluminum and are
hinged so that they can be opened for inspection.
7.5.5

EXHAUST SYSTEM

The exhaust system is made of stainless steel. It is
covered with a shroud that is used as a heat exchanger
to draw hot air for the cabin and for the induction system.
REPORT TC10000AFM
Page Number: 7-6
CUB CRAFTERS
Issued: 05/31/05
Date of Revision: 06/20/14
CC18-180