Powerplant; Engine - Cub Crafters CC18-180 Pilot Operating Handbook

CUB CRAFTERS SECTION 7
CC18-180 AIRCRAFT AND SYSTEMS
7.5

POWERPLANT

7.5.1 ENGINE

The CC18-180 is powered by either a Textron Lycoming
O-360-C4P or O-360-C1G engine (Figure 7-4). This is an
air-cooled, four cylinder powerplant that is capable of
delivering up to 180 hp at 2700 RPM.
Figure 7-4 - Engine
A throttle controls power to the engine. Each crew
member is provided with a throttle on the left side of the
cockpit. The air to fuel mixture is adjusted manually with
a control on the left side of the instrument panel. Pulling
the mixture control all the way back operates a cut-off
valve on the carburetor that stops the supply of fuel to the
engine. The mixture control should always be used to
stop the engine.
Issued: 05/31/05 REPORT TC10000AFM
Date of Revision: 06/20/14 Page Number: 7-5