Table of Contents
Advertisement
d.
Remove the display panel bracket (5).
The display panel bracket is available using spare part number 783085-001.
12.
If it is necessary to replace the WLAN antenna cables and transceivers:
a.
Detach the WLAN antenna transceivers (1) from the display enclosure. (The WLAN antenna
transceivers are attached to the display enclosure with double-sided adhesive.)
b.
Release the grounding tape (2) that secures the wireless antenna cable to the display enclosure
near the right hinge.
c.
Release the WLAN antenna cables from the clips (3) and routing channel built into the top edge of
the display enclosure.
44
Chapter 5 Removal and replacement procedures
Advertisement
Table of Contents
