Table of Contents
Advertisement
b.
Remove the two Phillips PM1.9×2.3 screws (2) that secure the display bezel to
the display assembly.
c.
Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of
the display bezel until the bezel disengages from the display enclosure.
d.
Remove the display bezel (4).
The display bezel is available using the spare part number 822624-001.
8.
If it is necessary to replace the webcam/microphone module:
a.
Detach the webcam/microphone module (1) from the display enclosure. (The webcam/
microphone module is attached to the display enclosure with double-sided adhesive at
two locations.)
b.
Disconnect the webcam/microphone module cable (2) from the webcam/microphone module.
Component replacement procedures
39
Advertisement
Table of Contents
