Table of Contents
Advertisement
To install the rubber feet, remove the protective backing from the rubber feet and install them in
the locations indicated in the above illustration.
Keyboard/top cover
Description
Keyboard/top cover in anodized silver finish (includes
keyboard cable):
For use in Belgium
For use in Canada
For use in Denmark, Finland,
and Norway
For use in France
For use in Germany
For use in Italy
Before removing the keyboard/top cover, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the 2 rear computer feet (see
NOTE:
When replacing the keyboard/top cover, be sure that the heat sink (see
TouchPad (see
installed on the replacement keyboard/top cover.
Remove the keyboard/top cover:
1.
Remove the two rubber screw covers (1).
NOTE:
Spare part number
783090-A41
783090-DB1
783090-DH1
783090-051
783090-041
783090-061
TouchPad board on page
The rubber screw covers are included in the Rubber Kit, spare part number 822631-001.
Description
For use in Latin America
For use in the Netherlands
For use in Russia
For use in Spain
For use in Switzerland
For use in the United Kingdom
For use in the United States
Computer feet on page
27) are removed from the defective keyboard/top cover and
Spare part number
783090-161
783090-B31
783090-251
783090-071
783090-BG1
783090-031
783090-001
20).
Heat sink on page
Component replacement procedures
26) and
21
Advertisement
Table of Contents
