Advanced Menu - HP Compaq Series Hardware And Software Manual

Advanced Menu

Select
Language (or press f2)
Boot options
Device options
Hardware and Software Guide
To Do This
Change the Computer Setup language.
■
Enable/Disable MultiBoot, which sets a
startup sequence that can include
most bootable devices and media in
the system. For details, refer to
Appendix B, "MultiBoot."
■
Set the boot order.
■
Swap the functions of the fn key and
left ctrl key.
■
Enable/Disable multiple pointing
devices at startup. (To set the
notebook to support only a single,
usually nonstandard, pointing device at
startup, select Disable.)
■
Enable/Disable USB legacy support for
a USB keyboard, mouse, and hub.
When USB legacy support is enabled:
❐
A USB keyboard, mouse, and hub
work even when a Windows
operating system is not loaded.
❐
The notebook starts from a
bootable hard drive, diskette drive
diskette, or CD, CD-RW, or DVD
inserted into a drive connected by
a USB connector to the notebook
or to an optional docking device.
■
Select a parallel port mode: EPP
(Enhanced Parallel Port), standard,
bidirectional, or ECP (Enhanced
Capabilities Port).
■
Enable/Disable all settings in the
SpeedStep window. (When Disable
is selected, the notebook runs in
Battery Optimized mode.)
Computer Setup
13–7