To connect the network cable:
1. Turn the notebook display-side up on a flat surface near a
network jack.
2. If the network cable has a noise suppression circuitry 1,
which prevents interference with TV and radio reception,
orient the circuitry end of the cable toward the notebook.
3. Plug the network cable into the RJ-45 (network) jack 2 on
the notebook.
4. Plug the other end of the cable into a network jack 3.
✎
Your notebook is equipped with LAN Power Save mode, which
enables you to conserve battery power. LAN Power Save mode
turns off the LAN device when the notebook is not connected
to external power and the network cable is disconnected. For
more information, refer to
Chapter 2, "Power."
Hardware and Software Guide
"Using LAN Power Save Mode"
Modem and Networking
in
10–9