Primary Memory Module Slot - HP Compaq Series Hardware And Software Manual

Memory Modules

Primary Memory Module Slot

To replace the existing memory module in the primary memory
module slot:
1. Shut down the notebook. (If you are not sure whether the
notebook is off or in hibernation, turn on the notebook by
sliding the power switch toward the front of the notebook.
Then shut down the notebook through the operating system.)
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
4. Turn the notebook upside down.
5. Remove any battery packs from the notebook.
6. Remove the 6 screws from the bottom of the notebook.
8–6 Hardware and Software Guide