Changing Drivelock Passwords - HP Compaq Series Hardware And Software Manual

Security

Changing DriveLock Passwords

To access the DriveLock settings in Computer Setup:
1. Shut down the notebook. If you are not sure whether the
notebook is off or in hibernation, turn the notebook on by
pressing the power button, and then shut down the notebook
through the operating system.
2. Be sure that the hard drive is inserted into the notebook
(not into an optional docking device or external MultiBay).
3. Open Computer Setup by turning on the notebook. Press
while the F10 = ROM Based Setup message is displayed in
the lower left of the screen.
❏
❏
4. Use the arrow keys to select Security > DriveLock
passwords, and then press
5. Use the arrow keys to select the location of the hard drive,
and then press
6. Use the arrow keys to select the field for the password you
want to change. Type your current password in the Old
password field, and then type the new password in the
New password field and in the Verify new password field.
Then press
7. To save your preferences, use arrow keys to select File >
Save Changes and Exit, and then follow the instructions on
the screen.
Your preferences are in effect when the notebook restarts.
7–14
To change the language, press
For navigation instructions, press
f10.
f10.
f2.
f1.
enter.
Hardware and Software Guide
f10