Power-On Passwords
A power-on password prevents unauthorized use of the notebook.
After this password is set, it must be entered each time the
notebook is turned on or restarted. A power-on password
■
Does not display as it is set, entered, changed, or deleted.
■
Must be set and entered with the same type of keys. For
example, a power-on password set with keyboard number
keys will not be recognized if you enter it with embedded
numeric keypad number keys.
■
Can include any combination of up to 32 letters and numbers
and is not case sensitive.
Setting Power-On Passwords
A power-on password is set, changed, or deleted in Computer
Setup.
To manage the password:
1. Open Computer Setup by turning on the notebook. Press
while the F10 = ROM Based Setup message is displayed in
the lower-left corner of the screen.
❏
❏
2. Use the arrow keys to select Security > Power-On
password, and then press
❏
Hardware and Software Guide
To change the language, press
For navigation instructions, press
To set a power-on password, type the password in the
New password and Verify new password fields, and then
press
f10.
f2.
f1.
enter.
Security
f10
7–9