Adding A Memory Module To The Expansion Memory Module Slot - HP Compaq Series Hardware And Software Manual

Adding a Memory Module to the Expansion
Memory Module Slot
To add or replace a memory module in the expansion memory
module slot:
1. Shut down the notebook. (If you are not sure whether the
notebook is off or in hibernation, turn the notebook on by
pressing the power button. Then shut down the notebook
through the operating system.)
2. Disconnect all external devices connected to the notebook.
3. Disconnect the power cord.
4. Turn the notebook upside down.
5. Remove any battery packs from the notebook.
6. Loosen the memory module cover screw 1.
7. Lift the memory module cover 2 away from the notebook.
Hardware and Software Guide
Hardware Components
5–21