Administrator Tools - Ricoh MP 2001L Operating Instructions Manual

3. User Tools (System Settings)
Energy Saver
Set the amount of time the machine waits before switching the panel off after a job is finished.
• Default: 1 min.
• The time can be set from 1 to 240 minutes, using the number keys.
• Energy Saver may not work when error messages appear.
• The machine automatically prints any printer data received while the panel is off.
System Auto Reset Timer
The System Reset setting automatically switches the screen to that of the function set in Function
Priority when no operations are in progress, or when an interrupted job is cleared. This setting
determines the system reset interval.
For details about Function Priority, see page 27 "General Features".
• Default: On, 60 sec.
• The time can be set from 10 to 999 seconds in 1 second increments, using the number keys.
• When the set time has passed, the control panel returns to the menu that was displayed before
the [User Tools/Counter] key was pressed.
Copier Auto Reset Timer
Specify the time to elapse before copier modes reset.
• If [Off] is selected, the machine does not automatically switch to the user code entry screen.
• Default: On, 60 sec.
• The time can be set from 10 to 999 seconds, using the number keys.

Administrator Tools

The administrator must set the following items. For settings or more information, contact the administrator.
It is recommended that the administrator program an administrator code when performing the settings.
User Code Man.:Copier
Allows you to control who uses the machine by setting codes for users.
User codes must be registered for user code management.
• Default: Off
30