Settings You Can Change with User Tools
• To access User Tools, see page 25 "Accessing User Tools (System Settings)".
General Features
Panel Key Sound
The beeper (key tone) sounds when a key is pressed.
• Default: On
Copy Count Display
The copy counter can be set to show the number of copies made (count up), or the number of
copies yet to be made (count down).
• Default: Up (count up)
Function Priority
You can specify the mode to be displayed immediately after the operation switch is turned on, or
when System Reset mode is turned on.
• Default: Copier
Print Priority
Set the print priority for each mode.
• page 20 "Multi-Access"
• Default: Display mode
• When [Interleave] is selected, the current print job will be interrupted after a maximum of five
sheets.
Display Contrast
You can adjust the brightness of the display.
Key Repeat
You can select whether or not to use the key repeat function.
Settings You Can Change with User Tools
27