Moen 6100 Series Specifications

There is more than 1 version of this model.
Page down to identify the version you have.
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supply lines with 3/8" compression fittings
• Includes metal pop-up waste assembly
• Includes optional 3 hole deck plate (escutcheon)
OPERATION
• Lever style handle
• Temperature controlled by 100° arc of handle travel
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
• Nonmetallic/nonferrous and ceramic material
STANDARDS
• Third party certified to WaterSense,® CSA B125.1, ASME A112.18.1,
and all applicable requirements referenced therein including NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
7-1/8"
(181mm)
1/4"
(7mm)
2-1/2"
(80mm)
MAX.
28-3/4"
(730mm)
Rev. 3/11
1-5/8"
(41mm)
OPTIONAL ESCUTCHEON
2-3/8"
5-7/8"
(150mm) X (60mm)
5-7/8"
(150mm)
Lift
Rod
3/8" (11mm)
COMPRESSION
FITTINGS
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
S p e c i f i c a t i o n s
LEVEL™
Single-Handle Lavatory Faucet
Models: 6100 series
NOTE: THIS FAUCET IS DESIGNED TO BE
IN STALLED THRU 1 HOLE, 1-1/4" MIN. DIA.
3-1/4"
83.3 83.3
(83mm)
1/2"
(14mm)
58°
1-1/8"
(28mm)
2-5/16"
(60mm)
3-15/16"
7-3/4"
(101mm)
(197mm) 248.4 248.4
2"
(51mm)
www.moen.com