Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
10 AMP DEEP CUT
VARIABLE SPEED
BAND SAW KIT
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2015 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15f
ITEM 62800
Advertisement
Table of Contents
Related Manuals for Chicago Electric 62800
Summary of Contents for Chicago Electric 62800
- Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. REV 15f ITEM 62800 10 AMP DEEP CUT VARIABLE SPEED BAND SAW KIT Visit our website at: http://www.harborfreight.com...
-
Page 2: Table Of Contents
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 62800... -
Page 3: Electrical Safety
Trigger on invites accidents. Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breathing protection must be NIOSH-approved for the specific hazards in the work area. Item 62800 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Power Tool Use And Care
• Properly ground power cord. Ground Fault Circuit If unreadable or missing, contact Interrupter (GFCI) should also be implemented Harbor Freight Tools for a replacement. – it prevents sustained electrical shock. Page 4 For technical questions, please call 1-888-866-5797. Item 62800... -
Page 5: Vibration Safety
If any abnormal as tingling, numbness, and white or blue fingers), vibration occurs, stop use immediately. seek medical advice as soon as possible. SAVE THESE INSTRUCTIONS. Item 62800 For technical questions, please call 1-888-866-5797. Page 5... - Page 6 Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Outlets for 2-Prong Plug Page 6 For technical questions, please call 1-888-866-5797. Item 62800...
-
Page 7: Extension Cords
Risk of Fire. Alternating Current Do not cover ventilation ducts. Keep flammable objects away. WARNING marking concerning Amperes Risk of Electric Shock. Properly connect power cord to appropriate outlet. Item 62800 For technical questions, please call 1-888-866-5797. Page 7... -
Page 8: Specifications
2. Remove the Screws (51) on the Frame (27). 3. Install the Guide Bar around the blade as shown using the Screws (51). See Figure A. Figure A: Guide Bar Page 8 For technical questions, please call 1-888-866-5797. Item 62800... - Page 9 Functions Trigger Speed Auxiliary Dial Handle Tension Handle Guide Blade Item 62800 For technical questions, please call 1-888-866-5797. Page 9...
- Page 10 Blade off Gear Wheels. See Figure B. Guide Bearing Gear Wheels Blade Figure C: Guide Bearing 4. Tension Blade according to instructions Figure B: Blade Installation in Blade Tensioning section. Page 10 For technical questions, please call 1-888-866-5797. Item 62800...
-
Page 11: Blade Tensioning
9. To prevent accidents, turn off the tool and unplug it after use. Clean, then store the tool indoors out of children’s reach. Item 62800 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Maintenance
• any other condition that may WARNING! If the supply cord of this affect its safe operation. power tool is damaged, it must be replaced only by a qualified service technician. Page 12 For technical questions, please call 1-888-866-5797. Item 62800... -
Page 13: Troubleshooting
See Extension Cords in Grounding section on page 6. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 62800 For technical questions, please call 1-888-866-5797. Page 13... -
Page 14: Parts List And Diagram
6×22 Slotted Screw 6200# Bearing 5×18 Hex Socket Head Cap Screw Worm Shaft 5×14 Hex Socket Head Cap Screw Intermediate Gear Blade Guard 6000# Bearing 14 TPI Blade *Item not shown. Page 14 For technical questions, please call 1-888-866-5797. Item 62800... -
Page 15: Assembly Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 62800 For technical questions, please call 1-888-866-5797. Page 15... -
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.