1. Manuals
  2. Brands
  3. HP Manuals
  4. Laptop
  5. ENVY
  6. Maintenance and service manual

HP ENVY Maintenance And Service Manual

Hide thumbs Also See for ENVY:
Table of Contents

Advertisement

Quick Links

See also: Maintenance and Service Manual
HP ENVY Notebook PC
Maintenance and Service Guide

Advertisement

Table of Contents
loading

Related Manuals for HP ENVY

Summary of Contents for HP ENVY

  • Page 1 HP ENVY Notebook PC Maintenance and Service Guide...
  • Page 2 HP End User License Agreement (EULA). If you do not accept these license terms, your sole remedy is to return the...
  • Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
  • Page 4 Safety warning notice...

  • Page 5: Table Of Contents

    Table of contents 1 Product description ............................1 2 External component identification ......................... 4 Finding your hardware and software information ....................4 Locating hardware ..........................4 Locating software ..........................4 Top ..................................5 TouchPad ............................. 5 Lights ..............................6 Buttons, speakers, and fingerprint reader (select models only) ............7 Keys ..............................
  • Page 6 5 Removal and replacement procedures for Customer Self-Repair parts ............. 27 Component replacement procedures ......................... 27 Optical drive ............................28 6 Removal and replacement procedures for Authorized Service Provider parts ........... 30 Component replacement procedures ......................... 30 Bottom cover ............................. 31 WLAN module ............................
  • Page 7 Downloading a BIOS update ......................78 9 Using HP PC Hardware Diagnostics (UEFI) ...................... 79 Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ..............79 10 Backing up, restoring, and recovering in Windows 8.1 .................. 80 Creating recovery media and backups ........................ 80 Creating HP Recovery media (select models only) ................
  • Page 8 12 Specifications ............................91 Computer specifications ............................91 39.6-cm (15.6-in) display specifications ......................92 Hard drive specifications ............................. 93 13 Power cord set requirements ........................94 Requirements for all countries ........................... 94 Requirements for specific countries and regions ....................94 14 Recycling ..............................

  • Page 9: Product Description

    Product description Category Description Product Name HP ENVY Notebook PC Processors 5th generation Intel® Core™ i7 Processor (Broadwell U, BGA) Intel Core i7-5500U (2.4GHz, turbo up to 3.0GHz), 1600MHz/4MB L3, Dual 15W 5th generation Intel Core i5 Processor (Broadwell U, BGA) Intel Core i5-5200U (2.2GHz, turbo up to 2.7GHz), 1600MHz/3MB L3, Dual 15W...
  • Page 10 DVD+/-RW Double-Layer SuperMulti Support zero-power optical drive Support M-disc Webcam and HP TrueVision HD: HD camera - fixed (no tilt) + activity LED, USB 2.0, M-JPEG (1280x720 by 30 frames per microphone second) Camera with rubber for non-touch with bezel...
  • Page 11 Support battery fast charge Security Support for the following: ● Kensington Security Lock ● Fingerprint reader with software support (HP Simple Pass) Operating system Preinstalled: Microsoft Windows 8.1 Microsoft Windows 8.1 Professional Microsoft Windows 8.1 (CPPP) Microsoft Windows 7 Professional (non-touch models only) FreeDOS 2.0 (non-touch models only)

  • Page 12: External Component Identification

    External component identification Finding your hardware and software information Locating hardware To find out what hardware is installed on your computer: From the Start screen, type control panel, and then select Control Panel. Select System and Security, select System, and then click Device Manager in the left column. A list reveals all the devices installed in your computer.

  • Page 13: Top

    TouchPad Component Description TouchPad zone Reads your finger gestures to move the pointer or activate items on the screen. Left TouchPad button Functions like the left button on an external mouse. Right TouchPad button Functions like the right button on an external mouse.

  • Page 14: Lights

    Lights Component Description ● Power light On: The computer is on. ● Blinking: The computer is in the Sleep state, which is an energy-saving mode. The computer shuts off power to the display and other unneeded components. ● Off: The computer is off or in Hibernation. Hibernation is an energy-saving mode that uses the least amount of power.

  • Page 15: Buttons, Speakers, And Fingerprint Reader (Select Models Only)

    Buttons, speakers, and fingerprint reader (select models only) Component Description ● Power button When the computer is off, press the button to turn on the computer. ● When the computer is on, press the button briefly to initiate Sleep. ● When the computer is in the Sleep state, press the button briefly to exit Sleep.

  • Page 16: Keys

    Keys Component Description Displays system information when pressed in combination with key. Executes frequently used system functions when pressed in combination with the key or the spacebar. Windows key Displays the Windows Start menu. Action keys Execute frequently used system functions. NOTE: On select models, the action key turns the radiance...

  • Page 17: Left Side

    Left side Component Description Power connector Connects an AC adapter. ● AC adapter/battery light White: The AC adapter is connected and the battery is fully charged. ● Blinking white: The AC adapter is disconnected and the battery has reached a low battery level. ●...
  • Page 18 Component Description NOTE: Be sure that the device cable has a 4-conductor connector that supports both audio-out (headphone) and audio- in (microphone). Memory card reader Reads optional memory cards that enable you to store, manage, share or access information. To insert a card: Hold the card label-side up, with connectors facing the computer.

  • Page 19: Right Side

    ● Hard drive light Blinking white: The hard drive is being accessed. ● Amber: HP 3D DriveGuard (select models only) has temporarily parked the hard drive. Security cable slot Attaches an optional security cable to the computer. NOTE: The security cable is designed to act as a deterrent, but it may not prevent the computer from being mishandled or stolen.

  • Page 20: Bottom

    Bottom Component Description Vents (2) Enable airflow to cool internal components. NOTE: The computer fan starts up automatically to cool internal components and prevent overheating. It is normal for the internal fan to cycle on and off during routine operation. Speakers (2) Produce sound.

  • Page 21: Service Tag

    This number describes the duration of the warranty period for the computer for each of the following categories: ● Defective part replacement ● HP authorized technician labor ● Repairs performed at customer site for those parts not eligible for Customer Self Repair (CSR) Service tag...

  • Page 22: Illustrated Parts Catalog

    Illustrated parts catalog NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Computer major components Chapter 3 Illustrated parts catalog...
  • Page 23 Item Component Spare part number Display assembly (includes webcam/microphone module and wireless antenna cables): Top cover with keyboard NOTE: For a list of country code suffixes for the top cover/keyboard spare part numbers listed below, see Bottom cover on page For use in models without fingerprint reader 812692-xx1 For use in models with a fingerprint reader...
  • Page 24 Item Component Spare part number (10) Fan (includes cable) 812682-001 (11) RJ-45 door For use in models without an optical drive 812701-001 For use in models with an optical drive 818652-001 (12) Solid-state drive (M.2, TLC) 256 GB 812708-001 128 GB (Best Buy SKUs) 820547-001 (13) WLAN module...

  • Page 25: Mass Storage Devices

    Item Component Spare part number (25) DVD+/-RW Double-Layer SuperMulti Drive 812693-001 (26) Base enclosure For use in models without an optical drive 812672-001 For use in models with an optical drive 812673-001 Mass storage devices Item Component Spare part number Hard drive (does not include hard drive bracket or hard drive connector cable): 2.0 TB, 5400 rpm, 9.5-mm 801808-005...

  • Page 26: Display Assembly Subcomponents - Touch Screen

    Display assembly subcomponents – touch screen Item Component Spare part number Hinge covers (left and right) 812699-001 Raw display panel (39.6-cm [15.6-in]; includes touch panel, touch board, bezel, rubber supports, display cable, webcam, and screws) 812689-001 812690-001 QHD+ 812691-001 Webcam module 812715-001 Display/webcam cable FHD touch screen models...

  • Page 27: Display Assembly Subcomponents - Non-Touch Screen

    Display assembly subcomponents – non-touch screen Item Component Spare part number Hinge covers (left and right) 812698-001 Bezel 812674-001 Webcam module 812714-001 Raw display panel (39.6-cm [15.6-in]; includes touch panel, touch board, bezel, rubber supports, display cable, webcam, and screws) 812702-001 812703-001 QHD+...

  • Page 28: Cables

    Item Component Spare part number For use with QHD+ displays 812677-001 Display enclosure For use with HD or FHD displays 812670-001 For use with QHD+ displays 823126-001 Cables Item Component Spare part number Card reader board cable 812680-001 USB board cable 812679-001 Hard drive cable 812697-001...

  • Page 29: Miscellaneous Parts

    AC adapter: 45-W HP Smart AC adapter 741727-001 65-W HP Smart AC adapter for use only in all countries and regions except for India and the People’s 710412-001 Republic of China 65-W HP Smart AC adapter for use only in India and the People’s Republic of China...

  • Page 30: Removal And Replacement Procedures Preliminary Requirements

    Removal and replacement procedures preliminary requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Flat-bladed screw driver ● Magnetic screw driver ● Phillips P0 and P1 screw drivers Service considerations The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures.

  • Page 31: Cables And Connectors

    Cables and connectors CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the computer. Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the cables during removal and insertion.
  • Page 32 CAUTION: To prevent damage to the computer when you are removing or installing internal components, observe these precautions: Keep components in their electrostatic-safe containers until you are ready to install them. Before touching an electronic component, discharge static electricity by using the guidelines described in this section.

  • Page 33: Packaging And Transporting Guidelines

    Packaging and transporting guidelines Follow these grounding guidelines when packaging and transporting equipment: ● To avoid hand contact, transport products in static-safe tubes, bags, or boxes. ● Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging. ● Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
  • Page 34 Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times.

  • Page 35: Removal And Replacement Procedures For Customer Self-Repair Parts

    Customer Self-Repair is supported in your location. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Component replacement procedures...

  • Page 36: Optical Drive

    Optical drive NOTE: Optical drive spare part kits include bracket and bezel. Description Spare part number DVD+/-RW Double-Layer SuperMulti Drive 812693-001 Before removing the optical drive, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 37 If it is necessary to replace the bracket on the rear of the optical drive, remove the two Phillips PM2.0×3.0 screws (1) that secure the bracket to the drive, and then remove the bracket (2). Reverse this procedure to reassemble and install the optical drive. Component replacement procedures...

  • Page 38: Removal And Replacement Procedures For Authorized Service Provider Parts

    Accessing these parts can damage the computer or void the warranty. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Component replacement procedures This chapter provides removal and replacement procedures for Authorized Service Provider only parts.

  • Page 39: Bottom Cover

    Bottom cover In this section, the first table provides the main spare part number for the top covers/keyboards. The second table provides the country code suffixes for the spare part number. Description Spare part number Bottom cover for use in models without an optical drive 812672-001 Bottom cover for use in models with an optical drive 812673-001...
  • Page 40 Remove the four Phillips PM2.5×4.0 screws that secure the bottom cover to the computer. Remove the bottom cover by working your way around and prying to disengage bottom cover from computer. Reverse this procedure to install the bottom cover. Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 41: Wlan Module

    WLAN module Description Spare part number Broadcom BCM43142 802.11 b/g/n 1x1 Wi-Fi + BT4.0 M.2 Combo Adapter 792608-005 Realtek RTL8723BE 802.11b/g/n 1x1 Wi-Fi + BT4.0 Combo Adapter 784644-005 Intel Dual Band Wireless-AC 7265 802.11 ac 2x2 WiFi + BT 4.0 Combo Adapter (non vPRO) 793840-005 CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module...
  • Page 42 Remove the WLAN module (3) by pulling the module away from the slot at an angle. NOTE: If the WLAN antenna cables are not connected to the terminals on the WLAN module, the protective sleeves must be installed on the antenna connectors, as shown in the following illustration. Reverse this procedure to install the WLAN module.

  • Page 43: Memory Module

    Failure to update the computer to the latest BIOS prior to installing new memory may result in various system problems. To update BIOS: Navigate to www.hp.com. Click Support & Drivers > click Drivers & Software. In the Enter a product name/number box, type the computer model information, and then click Search.
  • Page 44 Disconnect the battery. Remove the memory module: Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.) Remove the memory module (2) by pulling the module away from the slot at an angle. Reverse this procedure to install a memory module.

  • Page 45: Solid-State Drive (M.2)

    Solid-state drive (M.2) Description Spare part number 256 GB solid-state drive, M.2, TLC 812708-001 128 GB solid-state drive, M.2, TLC (Best Buy SKUs) 820547-001 Before removing the solid-state drive, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 46 Reverse this procedure to install the solid-state drive. Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 47: Rj-45 Door

    RJ-45 door Description Spare part number RJ-45 door for use in models without an optical drive 812701-001 RJ-45 door for use in models with an optical drive 818652-001 Before removing the RJ-45 door, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 48: Fan

    Reverse this procedure to install the RJ-45 door. Description Spare part number Fan (includes cable) 812682-001 Before removing the fan, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 49 Remove the fan (5). Reverse this procedure to install the fan. Component replacement procedures...

  • Page 50: Usb Board

    USB board Description Spare part number USB board 812695-001 USB board cable 812679-001 Before removing the USB board, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by unplugging the power cord from the computer.
  • Page 51 Remove the USB board (3). Reverse this procedure to install the USB board. Component replacement procedures...

  • Page 52: Subwoofer

    Subwoofer Description Spare part number Subwoofer 812707-001 Before removing the subwoofer, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by unplugging the power cord from the computer.
  • Page 53 Remove the subwoofer (4). Reverse this procedure to install the subwoofer. Component replacement procedures...

  • Page 54: Heat Sink

    Heat sink NOTE: The heat sink spare part kit includes replacement thermal material. Description Spare part number Heat sink for use in models with UMA graphics memory 812683-001 Heat sink for use in models with discrete graphics memory 812684-001 Before removing the heat sink, follow these steps: Turn off the computer.
  • Page 55 Remove the heat sink (2). NOTE: The thermal material must be thoroughly cleaned from the surfaces of the heat sink and the system board components each time the heat sink is removed. Replacement thermal material is included with the heat sink, processor, and system board spare part kits. Thermal paste is used on the processor (1) and the heat sink section (2) that services it.

  • Page 56: Battery

    WARNING! To reduce potential safety issues, use only the user-replaceable battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. CAUTION: Removing a user-replaceable battery that is the sole power source for the computer can cause loss of information.

  • Page 57: Hard Drive

    Hard drive NOTE: The hard drive spare part kit does not include the hard drive bracket or hard drive connector cable. The hard drive bracket and screws are included in the Hard Drive Hardware Kit, spare part number 812686-001. The hard drive cable is available using spare part number 812697-001. Description Spare part number 2.0 TB, 5400 rpm, 9.5-mm...
  • Page 58 If it is necessary to disassemble the hard drive, perform the following steps: Disconnect the hard drive connector cable (1) from the hard drive. Remove the four Phillips PM2.5×3.0 screws (2) that secure the hard drive cover to the hard drive. Remove the hard drive bracket (3) from the hard drive.

  • Page 59: Speakers (Front)

    Speakers (front) Description Spare part number Speaker Kit 812705-001 Before removing the speakers, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by unplugging the power cord from the computer.
  • Page 60 NOTE: Note the way the speaker cable is routed near the RTC battery (5). Remove the speaker cable from its routing path (6). Remove the speaker (7). Reverse this procedure to install the speakers. Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 61: Cable Routing

    Cable routing There are six ribbon cables that connect to the system board that route under the battery with specific routing around and through each other. Use the image below to determine correct cabling. (1): Card reader cable (2): Fingerprint reader cable (3): Touchpad cable (4): Keyboard backlight cable (5): LED board cable...

  • Page 62: Led Board

    LED board Description Spare part number LED board (includes cable) 812696-001 Before removing the LED board, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by unplugging the power cord from the computer.

  • Page 63: Fingerprint Reader Board

    Fingerprint reader board Description Spare part number Fingerprint reader board 818089-001 Fingerprint reader bracket 812700-001 Fingerprint reader cable 818039-001 Before removing the fingerprint reader board, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 64: Card Reader Board

    Card reader board Description Spare part number Card reader board 812694-001 Card reader board cable 812680-001 Before removing the card reader board, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 65: Touchpad Assembly

    TouchPad assembly Description Spare part number TouchPad assembly 818040-001 Touchpad support bracket 818042-001 Touchpad cable 818041-001 Before removing the TouchPad, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 66 Remove the TouchPad bracket (2), and the remove the TouchPad (3). Reverse this procedure to install the TouchPad. Chapter 6 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 67: System Board

    System board NOTE: The system board spare part kit includes replacement thermal material. Description Spare part number System board, includes Intel Core i7-5500U processor and 4 GB of discrete graphics memory; for use in 812712-001 models without the Windows 8.1 operating system System board, includes Intel Core i7-5500U processor and 4 GB of discrete graphics memory;...
  • Page 68 ● Memory module (see Memory module on page ● Heat sink (see Heat sink on page ● Fan (see Fan on page ● WLAN module (see WLAN module on page Remove the system board: Disconnect the following cables from the system board: (1) Display cable (2) Speaker cable (3) Power connector cable...
  • Page 69 Remove the system board (2) from the computer. Reverse this procedure to install the system board. Component replacement procedures...

  • Page 70: Rtc Battery

    RTC battery Description Spare part number RTC battery 819504-001 Before removing the RTC battery, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by unplugging the power cord from the computer.

  • Page 71: Speaker (Rear)

    Speaker (rear) Description Spare part number Speaker Kit 812705-001 Before removing the rear speaker, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by unplugging the power cord from the computer.

  • Page 72: Display Assembly - Touch Screen

    Display assembly – touch screen To remove the display assembly and access the display assembly subcomponents, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by unplugging the power cord from the computer.
  • Page 73 The display raw panel is available using spare part number 812689-001 for HD panels, 812690-001 for FHD panels, and 812691-001 for QHD+ panels. The raw panel kit includes touch panel, touch board, bezel, rubber supports, display cable, webcam, and screws. Remove the two screw covers (1) and two Phillips PM2.5×3.5 screws (2) that secure the display rear cover to the display.
  • Page 74 Lift the webcam enough to access the connector (2). Disconnect the cable (3) from the webcam module. To remove the display/webcam cable: The display cable is available using spare part number 812676-001 for FHD displays and 812678-001 for QHD+ displays. Disconnect the cable from the webcam module (1).
  • Page 75 Remove the display hinges (3). To remove the wireless antenna cables and transceivers, peel the transceivers from the enclosure (1), release the wireless antenna cables from the clips or tape (2) that secure the cables to the display enclosure, and then remove the antenna cables and transceivers (3). The antennas are available using spare part number 812669-001.

  • Page 76: Display Assembly - Non-Touch Screen

    Display assembly – non-touch screen To remove the display assembly and access the display assembly subcomponents, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by unplugging the power cord from the computer.
  • Page 77 Remove the display bezel (6). The bezel is available using spare part number 812674-001. Lift the hinge covers from the display. The hinge covers are available using spare part number 812698-001. Component replacement procedures...
  • Page 78 Remove the bezel trim by removing the two broadhead Phillips PM2.0×2.4 screws (1), and then sliding the trim away from the bezel (2). The bezel trim is available using spare part number 818043-001. To remove the webcam/microphone module: Position the display assembly with access to the top edge. Lift the webcam/microphone module enough to gain access to the connector (1).
  • Page 79 Rotate the display panel out of the enclosure (2) to gain access to the display cable connection on the back of the panel. The raw display panel is available using spare part number 812702-001 for HD displays, 812703-001 for FHD displays, and 812704-001 for QHD+ displays. On the back of the display panel, release the adhesive strip (1) that secures the display panel cable to the display panel, and then disconnect the cable (2).
  • Page 80 Remove the display hinges (3). The display hinges are available using spare part number 812687-001 for HD and FHD displays and 823127-001 for QHD+ displays. To remove the wireless antenna cables and transceivers, peel the transceivers from the top of the enclosure (1), release the wireless antenna cables from the clips built into the display enclosure (2), and then remove the cables and transceivers (3).
  • Page 81 To remove the display/webcam cable, remove the cable from the clips built into the display enclosure (1), and then remove the cable from the display enclosure (2). The display cable is available using spare part number 812675-001 for HD and FHD displays and 812677-001 for QHD+ displays.

  • Page 82: Power Connector Cable

    Power connector cable Description Spare part number Power connector cable (includes bracket) 812681-001 Before removing the power connector cable, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 83: Using Setup Utility (Bios) In Windows 8.1

    BIOS version information (also known as ROM date and System BIOS) can be accessed from the Start screen by typing support, selecting the HP Support Assistant app, selecting My computer, and then selecting System Information, or by using Setup Utility (BIOS).

  • Page 84: Downloading A Bios Update

    If your computer is connected to a network, consult the network administrator before installing any software updates, especially system BIOS updates. From the Start screen, type support, and then select the HP Support Assistant app. ‒ or – From the Windows desktop, click the question mark icon in the taskbar.

  • Page 85: Using Setup Utility (Bios) In Windows 7

    Updated versions of Setup Utility (BIOS) may be available on the HP website. Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file.

  • Page 86: Downloading A Bios Update

    Do not insert, remove, connect, or disconnect any device, cable, or cord. Select Start, type hp support assistant, and then select the HP Support Assistant program. Follow the on-screen instructions to identify your computer and access the BIOS update you want to download.

  • Page 87: Using Hp Pc Hardware Diagnostics (Uefi)

    Using HP PC Hardware Diagnostics (UEFI) HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components.

  • Page 88: Backing Up, Restoring, And Recovering In Windows 8.1

    HP Recovery Manager is a software program that allows you to create recovery media (using either a flash drive or a set of DVDs) after you successfully set up the computer. HP Recovery media can be used to perform system recovery if the hard drive becomes corrupted. System recovery reinstalls the original operating system and software programs that were installed at the factory and then configures the settings for the programs.

  • Page 89: Using Windows Tools

    The creation process can take an hour or more. Do not interrupt the creation process. ● If necessary, you can exit the program before you have finished creating all of the recovery DVDs. HP Recovery Manager will finish burning the current DVD. The next time you start HP Recovery Manager, you will be prompted to continue.

  • Page 90: Recovering Using Hp Recovery Manager

    ● On select models, if you want to reset your computer using a minimized image, you can choose the HP Minimized Image Recovery option from the HP Recovery partition or HP Recovery media. Minimized Image Recovery installs only drivers and hardware-enabling applications. Other applications included in the image continue to be available for installation through the Reinstall drivers and/or applications option in HP Recovery Manager.

  • Page 91: Using The Hp Recovery Partition (Select Models Only)

    Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be used if your system does not have an HP Recovery partition or if the hard drive is not working properly.

  • Page 92: Removing The Hp Recovery Partition (Select Models Only)

    Removing the HP Recovery partition (select models only) HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space. IMPORTANT: After you remove the HP Recovery partition, you can no longer use the Windows Refresh option or the Windows option to remove everything and reinstall Windows.

  • Page 93: Backing Up, Restoring, And Recovering In Windows 7

    (purchased separately) to create recovery discs, or you can obtain recovery discs for your computer from the HP website. If you use an external optical drive, it must be connected directly to a USB port on the computer, not to a USB port on an external device, such as a USB hub.

  • Page 94: Creating The Recovery Media

    Creating the recovery media Select Start and type recovery in the search field. Select HP Recovery Manager from the list. Allow the action to continue, if prompted. Click Recovery Media Creation. Follow the on-screen instructions to continue. To recover, see...

  • Page 95: Tips For A Successful Backup

    Tips for a successful backup ● Number backup discs before inserting them into the optical drive. ● Store personal files in the Documents, Music, Pictures, and Videos libraries, and back up these folders periodically. ● Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your settings. The screen shot can be a time-saver if you have to re-enter your preferences.

  • Page 96: Restore And Recovery

    Restoring specific files is also useful if you ever choose to recover the original system using HP Recovery Manager. You can only restore specific files that you have backed up before.

  • Page 97: Recovering Using Hp Recovery Partition (Select Models Only)

    ● If the recovery media do not work, you can obtain recovery discs for your system from the HP website. ● The Minimized Image Recovery option is recommended for advanced users only. All hardware-related drivers and software are re-installed, but other software applications are not. Do not interrupt the process until it is complete, otherwise the recovery will fail.
  • Page 98 Insert the flash drive into a USB port. Restart the computer. Press while the computer is restarting, and then press for boot options. Select the flash drive from the boot options window. Chapter 11 Backing up, restoring, and recovering in Windows 7...

  • Page 99: 12 Specifications

    12 Specifications Computer specifications Metric U.S. Dimensions Width 384 mm 15.12 in Depth 255 mm 10.04 in Height (front) 21.6 0.85 in Height (rear) 23.7 mm 0.93 in Weight 2370 g 5.22 lbs Input power Operating voltage and current 19.5 V dc @ 2.31 A – 45 W Temperature Operating 5°C to 35°C...

  • Page 100: 39.6-Cm (15.6-In) Display Specifications

    39.6-cm (15.6-in) display specifications Metric U.S. Active diagonal size 39.6-cm 15.6-in Resolution 1366x768 (HD) Surface treatment AntiGlare Brightness 220 nits Viewing angle Backlight WLED Graphics adapter Thickness 3.8 mm Chapter 12 Specifications...

  • Page 101: Hard Drive Specifications

    Hard drive specifications 1-TB* 750-GB* Dimensions Height 9.5 mm 9.5 mm Length 100.4 mm 100.4 mm Width 69.9 mm 69.9 mm Weight 107.0 g 115.0 g Interface type SATA SATA Transfer rate Synchronous (maximum) 300 MB/sec 300 MB/sec Security ATA security ATA security Seek times (typical read, including setting) Single track...

  • Page 102: 13 Power Cord Set Requirements

    13 Power cord set requirements The wide-range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC, or from 220 to 240 volts AC. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the equipment is purchased.
  • Page 103 Country/region Accredited agency Applicable note number Sweden SEMKO Switzerland Taiwan BSMI The United Kingdom The United States The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.

  • Page 104: 14 Recycling

    Follow the local laws and regulations in your area for battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/...

  • Page 105: Index

    Index caps lock light, identifying 6 DVD±RW Double-Layer with AC adapter, spare part numbers 21 card reader board SuperMulti Drive AC adapter/battery light 9 removal 56 precautions 23 action keys spare part number 16, 56 spare part number 17 identifying 8 card reader board cable antennas illustrated 20...
  • Page 106 18, 19 illustrated 17 removal 74 removing 66, 70, 71 precautions 23 spare part number 15, 74 HP PC Hardware Diagnostics (UEFI) spare part numbers 17 power connector cable bracket downloading 79 memory card reader, identifying 10 spare part number 15...
  • Page 107 (rear) recovery 88 USB board cable removal 63 discs 81, 83 illustrated 20 spare part numbers 63 HP Recovery Manager 82, 88 speakers media 83 removal 44 vents, identifying 12 starting 83 spare part numbers 16, 44 video, product description 2...

Table of Contents