HP 1920 Series User Manual page 89

2.
Downloaded from www.Manualslib.com
Figure 62 Configuring the speed of GigabitEthernet 1/0/4
Batch configure the autonegotiation speed range on GigabitEthernet 1/0/1, GigabitEthernet
1/0/2, and GigabitEthernet 1/0/3 as 100 Mbps:
a. On the Setup tab, select Auto 100 from the Speed list.
b. Select 1, 2, and 3 on the chassis front panel.
1, 2, and 3 represent ports GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and
GigabitEthernet 1/0/3.
c. Click Apply.
manuals search engine
76