Setting Buffer Capacity And Refresh Interval - HP 1920 Series User Manual

4.
Table 13 Configuration items

Setting buffer capacity and refresh interval

1.
2.
3.
4.
Table 14 Configuration items
Downloaded from www.Manualslib.com
Click Apply.
Item Description
IPv4/Domain
Specify the IPv4 address or domain name
of the log host.
Loghost IP/Domain
IPv6
Set the IPv6 address of the log host.
Loghost IP
Select Device > Syslog from the navigation tree.
Click the Log Setup tab.
The syslog configuration page appears.
Figure 52 Syslog configuration page
Configure buffer capacity and refresh interval as described in
Click Apply.
Item Description
Buffer Capacity Set the number of logs that can be stored in the log buffer.
Set the log refresh interval.
You can select manual refresh or automatic refresh:
Refresh Interval
•
•
manuals search engine
Manual—Click Refresh to view the latest log information.
Automatic—Select to refresh the Web interface every 1 minute, 5 minutes, or 10
minutes.
63
IMPORTANT:
You can specify up to four log hosts.
Table 14.