Adding An Ipv6 Acl - HP 1920 Series User Manual

Adding an IPv6 ACL

1.
2.
3.
4.
Downloaded from www.Manualslib.com
Item
Source MAC
Address
MAC
Source Mask
Address
Destination MAC
Filter
Address
Destination Mask
COS(802.1p priority)
LSAP Type
LSAP Mask
Type Filter
Protocol Type
Protocol Mask
Time Range
Select QoS > ACL IPv6 from the navigation tree.
Click the Add tab.
The IPv6 ACL configuration page appears.
Figure 450 Adding an IPv6 ACL
Add an IPv6 ACL.
Click Apply.
manuals search engine
Description
Select the Source MAC Address box and enter a source MAC address and
a mask.
Select the Destination MAC Address box and enter a destination MAC
address and a mask.
Specify the 802.1p priority for the rule.
Select the LSAP Type box and specify the DSAP and SSAP fields in the LLC
encapsulation by configuring the following items:
•
LSAP Type—Frame encapsulation format.
•
LSAP Mask—LSAP mask.
Select the Protocol Type box and specify the link layer protocol type by
configuring the following items:
•
Protocol Type—Frame type. It corresponds to the type-code field of
Ethernet_II and Ethernet_SNAP frames.
•
Protocol Mask—Protocol mask.
Select the time range during which the rule takes effect.
461