Configuring Mac Authentication On A Port; Mac Authentication Configuration Examples; Local Mac Authentication Configuration Example - HP 1920 Series User Manual

Configuring MAC authentication on a port

1.
2.
3.

MAC authentication configuration examples

Local MAC authentication configuration example

Network requirements
As shown in
Internet access, as follows:
Downloaded from www.Manualslib.com
From the navigation tree, select Authentication > MAC Authentication.
In the Ports With MAC Authentication Enabled area, click Add.
Figure 389 Configuring MAC authentication on a port
Configure MAC authentication for a port as described in
Table 126 Configuration items
Item
Port
Enable MAC VLAN
Auth-Fail VLAN
Figure 390, configure local MAC authentication on port GigabitEthernet 1/0/1 to control
manuals search engine
Table
Description
Selects a port on which you want to enable MAC authentication.
Specifies whether to enable MAC-based VLAN on the port.
IMPORTANT:
You can enable MAC authentication only on hybrid ports.
Specifies an existing VLAN as the MAC authentication Auth-Fail VLAN.
IMPORTANT:
•
The MAC authentication Auth-Fail VLAN has a lower priority than the
802.1X guest VLAN on a port that performs MAC-based access
control. If a user fails both types of authentication, the access port
adds the user to the 802.1X guest VLAN. For more information about
802.1X guest VLANs, see "Configuring
•
The MAC authentication Auth-Fail VLAN function has higher priority
than the quiet function of MAC authentication.
•
The MAC authentication Auth-Fail VLAN function has higher priority
than the block MAC action, but it has lower priority than the shutdown
port action of the port intrusion protection feature. For more
information about port intrusion protection, see
security."
408
126, and then click Apply.
802.1X."
"Configuring port