HP 1920 Series User Manual page 394

3.
4.
Table 118 Configuration items
Downloaded from www.Manualslib.com
Figure 364 Local user configuration page
Configure the local user as described in
Click Apply.
Item Description
Username Specify a name for the local user.
Specify and confirm the password of the local user.
Password
The settings of these two fields must be the same.
Confirm
Do not specify a password starting with spaces because the spaces will be ignored.
Password Encryption Select a password encryption method: Reversible or Irreversible.
Select a user group for the local user.
Group
For information about user group configuration, see
Select a user type for the local user: Common User, Security Log Administrator, or
Guest Administrator.
User-type
Only the Common User option takes effect on this software version.
Select an authorization level for the local user: Visitor, Monitor, Configure, or
Management, in ascending order of priority.
Level
This option takes effect on only Web, FTP, Telnet, and SSH users.
Select the service types for the local user to use, including Web, FTP, Telnet, LAN
access (Ethernet access service such as 802.1X), and SSH.
Service-type If you do not specify any service type for a local user who uses local authentication,
the user cannot pass authentication and therefore cannot log in.
The service type of the guest administrator and security log administrator is Web.
manuals search engine
Table 118.
381
"Configuring a user group."