Igmp Snooping Configuration Example; Network Requirements - HP 1920 Series User Manual

Figure 233 Displaying detailed information about the entry
Table 85 Field description

IGMP snooping configuration example

Network requirements

As shown in
acts as the IGMP querier.
Perform the configuration so Host A can receive the multicast data addressed to the multicast group
224.1.1.1.
Downloaded from www.Manualslib.com
Field Description
VLAN ID ID of the VLAN to which the entry belongs.
Multicast source address. If no multicast sources are specified, this field displays
Source Address
0.0.0.0.
Group Address Multicast group address.
Router Port(s) All router ports.
Member Port(s) All member ports.
Figure 234, IGMPv2 runs on Router A and IGMPv2 snooping runs on Switch A. Router A
manuals search engine
260