2.
3.
4.
Downloaded from
www.Manualslib.com
Click the GigabitEthernet1/0/1 port name in the port list.
b.
c.
Click the Status Information tab at the lower half of the page.
The output shows that port GigabitEthernet 1/0/1 is connected to an MED neighbor device.
Figure 213 The status information tab (1)
Display the status information of port GigabitEthernet 1/0/2 on Switch A:
a.
Click the GigabitEthernet1/0/2 port name in the port list.
b.
Click the Status Information tab at the lower half of the page.
The output shows that port GigabitEthernet 1/0/2 is connected to a non-MED neighbor device
(Switch B), as shown in
Figure 214 The status information tab (2)
Tear down the link between Switch A and Switch B.
Click Refresh to display the status information of port GigabitEthernet 1/0/2 on Switch A.
The updated status information of port GigabitEthernet 1/0/2 shows that no neighbor device is
connected to the port, as shown in
Figure 215 The status information tab displaying the updated port status information
manuals search engine
Figure
214.
Figure
215.
240