HP 1920 Series User Manual page 227

4.
Figure 193 Creating static link aggregation group 1
Method 2: Create dynamic link aggregation group 1
1.
2.
3.
4.
Downloaded from www.Manualslib.com
Enter link aggregation interface ID 1.
a.
b. Select Static (LACP Disabled) for the aggregate interface type.
c. Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 on the
chassis front panel.
Click Apply.
From the navigation tree, select Network > Link Aggregation.
Click Create.
Configure dynamic aggregation group 1:
a. Enter link aggregation interface ID 1.
b. Select Dynamic (LACP Enabled) for aggregate interface type.
c. Select GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3 on the
chassis front panel.
Click Apply.
manuals search engine
214