Adding Rules To An Snmp View - HP 1920 Series User Manual

8.
9.

Adding rules to an SNMP view

1.
2.
3.
Downloaded from www.Manualslib.com
Repeat steps 6 and 7 to add more rules for the SNMP view.
Click Apply.
To cancel the view, click Cancel.
Figure 104 Creating an SNMP view (2)
Table 34 Configuration items
Item Description
View Name Set the SNMP view name.
Select to exclude or include the objects in the view range determined by the MIB
Rule
subtree OID and subtree mask.
Set the MIB subtree OID (such as 1.4.5.3.1) or name (such as system).
MIB Subtree OID
MIB subtree OID identifies the position of a node in the MIB tree, and it can
uniquely identify a MIB subtree.
Set the subtree mask, a hexadecimal string. Its length must be an even number in
the range of 2 to 32.
Subtree Mask
If no subtree mask is specified, the default subtree mask (all Fs) will be used for
mask-OID matching.
Select Device > SNMP from the navigation tree.
Click the View tab.
The page in Figure 102 appears.
Click the icon of the target view.
The Add rule for the view ViewDefault window appears.
manuals search engine
116