Select
Built-In Device Options
Port Options (all are enabled by
default)
Set Security Level
Restore Security Defaults
108 Chapter 5 Computer Setup
Downloaded from
www.Manualslib.com
To do this
●
Enable/disable secondary battery fast charge (enabled by default).
●
Enable/disable HP QuickLook 2 (enabled by default).
●
Enable/disable Virtualization Technology (select models only; enabled by default).
●
Enable/disable TXT (Intel® Trusted Execution Technology) (select models only;
enabled by default).
●
Enable/disable Dual Core CPU (select models only; enabled by default).
●
Enable/disable the wireless button state (enabled by default).
●
Enable/disable embedded WWAN device radio (select models only; enabled by
default).
●
Enable/disable embedded Bluetooth® device radio (enabled by default).
●
Enable/disable the Network Interface Controller (LAN) (enabled by default).
●
Set the wake on LAN state. Options include the following:
◦
◦
◦
●
Enable/disable the fingerprint device (enabled by default).
●
Enable/disable a modem device (enabled by default).
NOTE:
●
Enable/disable the smart card slot.
●
Enable/disable the ExpressCard slot.
●
Enable/disable the serial port.
●
Enable/disable the parallel port.
●
Enable/disable the flash media reader.
●
Enable/disable the USB port.
CAUTION:
devices on the advanced port replicator.
●
Enable/disable the 1394 port.
Change, view, or hide security levels for all BIOS menu items.
Restore the default security settings.
manuals search engine
NOTE:
Availability of the options above varies by computer model.
Disabled
Boot to Network (set by default)
Follow Boot Order
All port options are enabled by default.
Disabling the USB port also disables MultiBay devices and ExpressCard