Griddle; Care And Cleaning - GE CGS980 Owner's Manual & Installation Instructions

Care and cleaning of the range.
Be sure electrical power is off and all surfaces are cool before cleaning any part of the range.
Front right burner
Burner cap
Burner head
Electrode
Burner base
Make sure the hole in the burner head is
positioned over the electrode and that
the burner head is fully inserted inside
the burner base. A small gap between
the base and head is normal.
Front left burner, back right burner
and back left burner
Burner cap
Burner head
Stability
Use a sewing
needle or
chamber
twist-tie to
unclog the
small hole in
the burner
Burner base
head.
Electrode
Make sure the slot in the burner head
is positioned over the electrode.
32
WARNING:
If your range is removed for cleaning, servicing or any reason,
be sure the anti-tip device is re-engaged properly when the range is replaced. Failure to
take this precaution could result in tipping of the range and cause injury.
Sealed Burner Assemblies
Turn all controls OFF before removing the
burner parts.
The round side burner caps and burner
heads can be lifted off, making them easy
to clean. The electrodes are not removable.
The oval center burner head and cap
assembly can be lifted off, making it easy
to clean. The burner electrode is not
removable.
CAUTION:
cooktop without all burner parts and grates
in place.
Electrode
Front left, back right
and back left burner
The electrode of the spark igniter is
Center
exposed when the burner head is

griddle

removed. When one burner is turned to
LITE, all the burners spark. Do not
Burner head
attempt to disassemble or clean around
and cap
any burner while another burner is on.
assembly
An electric shock may result, which
Electrode
could cause you to knock over hot
cookware.
Do not operate the
Burner head
Electrode
Burner base
Front right burner